Paper GSM, Book Size and Cover Lamination: The Spec Guide for Indian Book Printing
Key facts
- GSM means grams per square metre and indicates paper weight, which roughly tracks thickness and opacity
- 70 to 80 gsm is the standard range for black and white book text; 100 to 130 gsm art paper is for colour and photos
- Covers are usually 250 or 300 gsm art card with gloss or matt lamination
- Matt lamination hides fingerprints on dark covers; gloss shows them and scuffs more visibly
- A5 (148 x 210 mm), 5.5 x 8.5 in and 6 x 9 in suit novels and non-fiction; A4 suits textbooks and coaching material
- Spine width is roughly half the page count multiplied by the paper caliper, plus the cover thickness
- Heavier paper and larger trim raise courier weight, which matters on bulk orders
A first-time author sat at our counter in Kapoorthala with a finished manuscript and a worried face. “Aapne 70 gsm, 80 gsm, matt, gloss sab bola, mujhe kuch samajh nahi aaya,” she said. We get this every week, from students in Lucknow and from authors in Delhi, Mumbai and Hyderabad messaging us a PDF. So here is the plain-language guide to paper gsm for book printing, trim size and cover lamination, the three specs that every quote asks you to decide.
Quick answer
GSM is grams per square metre, the weight of the paper, and it is a reasonable stand-in for thickness and opacity. For black and white text, 70 or 80 gsm is right for most books; 100 to 130 gsm art paper is for colour pages and photographs. Trim size should follow the content: A5 or 5.5 x 8.5 in for novels and poetry, 6 x 9 in for non-fiction, A4 for textbooks and coaching modules. Covers are 250 or 300 gsm art card, laminated matt for dark or text-heavy designs and gloss for bright, image-led ones. Get these three right and most of your print quality, cost and courier weight are already decided.
What paper gsm for book printing actually means
GSM stands for grams per square metre. Take a sheet of the paper exactly one metre by one metre and weigh it; that number in grams is the gsm. A 70 gsm sheet weighs 70 grams per square metre, an 80 gsm sheet weighs 80, and so on. That is all the number tells you directly: weight.
In practice, weight tracks two things you actually care about.
- Thickness (caliper). Heavier paper is usually thicker, though not in a fixed ratio. Art paper is compressed and coated, so a 130 gsm art sheet can be thinner than a 100 gsm uncoated sheet. Caliper is what decides your spine width.
- Opacity. Heavier, thicker paper lets less of the printing on the reverse side show through. This is the practical reason 70 gsm feels “cheaper” than 80 gsm on a page with dense text and bold headings.
So when we talk about paper gsm for book printing at the counter, we are really talking about how the page will feel in the hand, how much the reverse shows through, how thick the book will be, and how heavy the carton is going to be when it goes to Patna or Pune.
70 vs 80 gsm for text pages
This is the most common decision and the one people overthink. Both are standard, both are what the majority of Indian paperbacks use. The differences are small but real.
Show-through
On 70 gsm you will faintly see bold headings and dark images from the reverse side under normal light. For a novel set in ordinary body text this is barely noticeable. For a textbook with heavy tables, shaded boxes and black-filled headers, 80 gsm keeps the page cleaner.
Feel
80 gsm is a touch stiffer and turns with a slightly more satisfying snap. Readers rarely name it, but they notice it. For a book that will be priced as a premium paperback, 80 gsm is the safer choice.
Weight and bulk
A 300-page A5 book on 80 gsm weighs roughly 14 percent more than the same book on 70 gsm, and is a little thicker. Across 500 copies to Kolkata or Chennai that is a visibly heavier consignment. For long textbooks, long novels or anything going out in bulk, 70 gsm is often the sensible economy; for shorter books, the difference in courier is small enough that 80 gsm usually wins on feel.
When 90 or 100 gsm uncoated matters
Occasionally we recommend 90 or 100 gsm uncoated (maplitho or bond) for text. Cases include workbooks where students write with ink pens on both sides, lab manuals that are handled with damp hands, and books with full-page black and white diagrams where show-through would confuse the reader. It is also a good choice for hardcover gift editions where the extra heft feels right.
Art paper, 100 to 130 gsm, for colour and photographs
Colour printing needs a smoother, coated surface so ink or toner sits on top of the sheet instead of soaking in. That is what art paper is: a base sheet coated with clay and binder, then calendared smooth. Colour looks sharper and photographs hold detail that would go muddy on uncoated paper.
- 100 gsm art suits colour textbooks, magazines and coaching modules with colour diagrams, where the book is long and weight matters.
- 115 to 130 gsm art suits children’s picture books, cookbooks, photo-led annual reports and any book where each page carries a large image. It is stiffer, more opaque and feels substantial.
Matt vs gloss art paper for reading comfort
Art paper comes in gloss and matt finishes. Gloss gives maximum punch to photographs but reflects light, which tires the eye on long reading. Matt art paper keeps the colour accuracy and the smooth surface while being much easier to read under a tube light or a desk lamp. For anything with paragraphs of text next to colour images, cookbooks, textbooks, reports, we usually suggest matt art paper. Keep gloss for photo books and brochures where the picture is the point.
Bond, maplitho and art paper in plain terms
Three names come up constantly and people often think they are grades of the same thing. They are different papers for different jobs.
- Bond paper. The crisp, slightly hard, bright white paper used in offices for letterheads and laser printing. Available in 70 to 100 gsm. Prints black and white text very cleanly and takes pen ink well, which is why it suits workbooks, question banks and thesis copies. It can feel a bit stiff for a novel.
- Maplitho paper. The classic Indian book paper: uncoated, smooth, a little softer and often slightly off-white or cream. It is easy on the eyes for long reading and is the natural choice for novels, poetry, religious books and general non-fiction. Typically 60 to 90 gsm; we use 70 and 80 for books.
- Art paper. Coated, smooth and glossy or matt as above. For colour. Not meant for writing on; a ball pen smears on it.
A useful mental model: bond for writing in, maplitho for reading, art paper for looking at.
Cover boards and lamination
The cover takes the knocks, so it is a heavier, stiffer stock, and it is almost always laminated.
250 vs 300 gsm art card
Both are standard for paperback covers. 250 gsm is flexible, folds cleanly at the spine and is right for slim books up to around 150 pages, where a stiffer cover would feel out of proportion. 300 gsm is noticeably sturdier, resists curling in humid weather, and suits thicker books, coaching modules that get thrown into bags, and anything meant to sit on a shelf for years. On very long books the extra rigidity also helps the spine stand square.
Gloss lamination
A shiny plastic film bonded to the printed cover. Colours look saturated, whites look bright, and the surface wipes clean. Its weaknesses: it shows fingerprints, especially on dark areas; scuff marks appear as dull patches; and on a black or deep navy cover every scratch from a courier carton shows. Good for children’s books, photo-led covers and bright illustrated designs.
Matt lamination
A film with a soft, non-reflective finish. It hides fingerprints, scuffs less visibly, and gives a quieter, more premium feel. Colours sit slightly flatter than under gloss, so vivid artwork loses a little punch. For dark covers, text-heavy covers, literary fiction, poetry, theses and professional reports, matt is nearly always the better choice. For a long explanation of why this matters, see the mistakes section below.
Spot UV
You may hear of spot UV, a glossy varnish applied only to selected areas such as the title over a matt laminated cover. It looks striking. It is a finishing step with its own setup, so ask about it if the design calls for it rather than assuming it is included.
Practical tip: if your cover has large areas of black or dark colour, choose matt lamination and 300 gsm board. Gloss on a dark cover looks wonderful for the first ten minutes and then shows every fingerprint and scuff. If you must have gloss on a dark design, ask us to print and laminate a single sample first and carry it around in a bag for a day.
Trim sizes: which book size suits which book
Trim size is the finished size of the page after cutting. We offer A5, A4, 5.5 x 8.5 in, 6 x 9 in and custom sizes. Each has a natural home.
A5 (148 x 210 mm)
Half of A4. The default Indian paperback size for novels, poetry, short story collections, religious books and general non-fiction. Fits the hand, fits a bag, imposes efficiently on standard sheets. If you are unsure, start here.
5.5 x 8.5 in (about 140 x 216 mm)
Very close to A5, a little narrower and taller. It is the common size on international print-on-demand platforms, so authors who also publish abroad like to keep one file for both. Suits novels, memoirs and poetry.
6 x 9 in (about 152 x 229 mm)
The standard trade non-fiction size: business books, self-help, biographies, academic monographs. The wider page allows a comfortable line length at a readable font size and reduces page count compared with A5 for the same text.
A4 (210 x 297 mm)
Textbooks, coaching modules, lab manuals, theses, reports, magazines and yearbooks. Room for two-column layouts, large tables, worked solutions and diagrams. Heavy and awkward for a novel; students do not mind it for a module they study at a desk.
Custom sizes
Square children’s books, pocket-sized prayer books, landscape cookbooks, oversized art books. Possible, but each custom size has an imposition and cost consequence, explained next.
How size changes page count, imposition and cost
Two effects work together here.
Page count
The same manuscript set in the same font makes fewer pages on a bigger page. A 90,000-word novel might run to about 320 pages at A5 and about 280 at 6 x 9. Fewer pages means less paper, a thinner spine and a lighter book. But bigger pages use more paper each, so the saving is partial, and for a novel the reader’s comfort in the hand matters more than a few pages.
Imposition on digital sheets
Digital book presses print on large sheets, commonly SRA3 (320 x 450 mm), and the pages of your book are arranged, or imposed, on that sheet so they fold and cut to size. Four A5 pages fit on one side of an SRA3 sheet with room for 3 mm bleed and trim, so eight pages per sheet. The same is true for 5.5 x 8.5 in. A4 fits two per side, which is still clean. But 6 x 9 in is awkward on SRA3: two copies fit across the width, yet the 9 in height does not allow two down, so a quarter of the sheet is trimmed away and thrown out unless the press runs a longer 13 x 19 in sheet. Custom sizes can waste even more. This paper waste is paid for in the per-copy rate, which is why an odd size can cost more than a larger standard one. Ask us to check the imposition before you lock a custom trim; a change of 10 mm sometimes halves the waste.
Page count, spine width and the right binding
Once you know the page count and paper, you can work out the spine. Your cover designer needs this figure to the millimetre, and getting it wrong is the most common cover file error we see from remote customers.
The method
Spine width is the number of leaves (page count divided by two) multiplied by the paper caliper, plus the thickness of the two cover boards. Caliper is the thickness of one sheet, usually quoted in microns or millimetres, and it varies by paper type and mill, so we always confirm it from the actual stock we hold. Typical figures: 70 gsm maplitho roughly 0.09 mm per sheet, 80 gsm roughly 0.10 mm, 100 gsm matt art roughly 0.09 to 0.10 mm, 130 gsm art roughly 0.12 mm. A 300 gsm cover is roughly 0.3 mm each side.
An example
A 240-page novel on 80 gsm maplitho has 120 leaves. 120 multiplied by 0.10 mm is 12 mm. Add about 0.6 mm for the two cover boards and the spine is roughly 12.5 mm, so we would tell the designer 12.5 mm and ask them to keep spine text at least 2 mm inside each edge. The same 240 pages on 130 gsm art paper would give 120 multiplied by 0.12, about 14.4 mm plus board, roughly 15 mm. Our print-ready PDF guide covers how to set the cover file up once you have the number.
Binding choice by page count
- Saddle stitch (folded and stapled through the spine) works up to about 48 pages. Beyond that the inner pages creep outward and the booklet will not close flat.
- Perfect binding (pages ground and glued with hot-melt adhesive into a wrap-around cover) suits roughly 60 to 500 pages. Below 60 the spine is too thin to glue reliably; above 500 the book gets heavy and the spine stresses. See our perfect binding service.
- Spiral and wiro open 360 degrees and lie flat, which is what lab manuals, cookbooks and practice workbooks need. They handle a wide page range but have no printed spine. Details on spiral and wiro binding.
- Hardcover (case binding) wraps the sewn or glued block in rigid board with cloth or printed paper and spine lettering. Suits theses, library copies, gift editions and anything meant to last decades.
For a fuller comparison, read paperback vs hardcover vs spiral binding.
How specs change weight and courier
Because we courier books to 178+ cities, we think about paper gsm for book printing in terms of weight right at the spec stage, and you should too if your order is going to Delhi, Mumbai, Bengaluru or Jaipur rather than being collected from our counter in Lucknow.
Weight per copy is roughly the page area multiplied by the gsm multiplied by the number of leaves, plus the cover. So three things push weight up: bigger trim, heavier gsm and more pages. Going from A5 to A4 doubles the paper area per page. Going from 70 to 130 gsm nearly doubles the weight per page again. A 400-page A4 book on 130 gsm art paper is a heavy object, and 500 of them make a consignment that moves up several courier weight bands compared with the same book at A5 on 70 gsm.
None of this means you should always choose the lightest option. It means you should choose heavy paper where the content earns it (photographs, colour diagrams, writing paper for students) and standard paper everywhere else. We quote courier as part of every remote order, so the effect of a spec change on freight is visible before you confirm. Our post on book printing with pan-India delivery explains weight bands and volumetric weight in detail.
Spec recommendations by book type
These are starting points from what works for the majority of jobs at our counter. Your content may argue for something different, and we will tell you if we think so.
| Book type | Trim size | Text paper | Cover | Binding |
|---|---|---|---|---|
| Novel | A5 or 5.5 x 8.5 in | 70 or 80 gsm maplitho, cream or white | 300 gsm art card, matt lamination | Perfect binding |
| Poetry | A5 or 5.5 x 8.5 in | 80 gsm maplitho | 300 gsm, matt lamination | Perfect binding (saddle stitch if under 48 pages) |
| Textbook | A4 or 6 x 9 in | 70 or 80 gsm; 100 gsm matt art if colour | 300 gsm, gloss or matt | Perfect binding |
| Coaching module | A4 | 70 gsm maplitho or bond | 250 or 300 gsm, gloss lamination | Perfect binding; spiral for practice sets |
| Lab manual | A4 | 80 to 100 gsm bond | 300 gsm, gloss lamination | Spiral or wiro |
| Thesis | A4 | 80 gsm bond | Hard board with printed or cloth wrap, spine lettering | Hardcover (case binding) |
| Children’s picture book | Custom square or A4 landscape | 130 gsm matt or gloss art | 300 gsm gloss, or hardcover | Saddle stitch if short; perfect or hardcover otherwise |
| Magazine | A4 | 100 gsm gloss or matt art | 250 gsm art card, gloss | Saddle stitch up to 48 pages; perfect binding beyond |
| Annual report | A4 | 100 to 130 gsm matt art | 300 gsm, matt with optional spot UV | Perfect binding |
| Cookbook | A4 or custom landscape | 115 to 130 gsm matt art | 300 gsm matt, or hardcover | Wiro to lie flat, or hardcover |
Coaching institutes can also see our dedicated study material printing page, students our thesis printing and binding page, and parents and illustrators our children’s book printing page.
Paper gsm for book printing: comparison at a glance
| Paper | Typical use | Show-through | Feel | Weight impact |
|---|---|---|---|---|
| 70 gsm maplitho | Novels, long textbooks, bulk coaching modules | Slight on bold headings | Soft, flexible | Lowest; best for long books and bulk courier |
| 80 gsm maplitho or bond | Premium paperbacks, poetry, theses, workbooks | Minimal | Crisp, slightly stiffer | About 14 percent more than 70 gsm |
| 90 to 100 gsm bond | Lab manuals, write-in workbooks, gift editions | Very low | Firm | Noticeably heavier; use with purpose |
| 100 gsm matt or gloss art | Colour textbooks, magazines, colour modules | Low | Smooth, coated | Similar to 100 gsm bond but thinner |
| 115 to 130 gsm art | Picture books, cookbooks, reports, photo pages | Almost none | Stiff, substantial | Heavy; keep page counts moderate |
| 250 gsm art card | Covers for slim books and magazines | Not applicable | Flexible cover | Light cover |
| 300 gsm art card | Covers for most paperbacks and modules | Not applicable | Sturdy cover | Slightly heavier; better durability |
Common spec mistakes we see
Most of these come from choosing what sounds best rather than what the content needs. None are fatal, and all are cheap to avoid before printing.
- 130 gsm art paper for a 400-page textbook. “Best quality paper lagao” is the instruction we hear. The result is a brick: thick, heavy, expensive to print and expensive to courier, with a spine that struggles. A textbook with a handful of colour pages is better on 70 or 80 gsm with the colour pages grouped in a signature on 100 gsm art, or the whole book on 100 gsm matt art if colour runs throughout.
- Gloss lamination on a black cover. Looks dramatic in the design file. In the hand it shows fingerprints within minutes and courier scuffs within a day. Matt lamination on dark covers, almost always.
- A4 for a novel. A novel wants to be held in one hand and read in bed or on a train. A4 is for desks. Choose A5, 5.5 x 8.5 or 6 x 9.
- Guessing the spine width. A designer in Bengaluru estimates 20 mm from a blog post, the real spine is 14 mm, and the spine text wraps onto the front cover. Ask us for the figure from the actual stock before the cover is finalised.
- Gloss art paper for a text-heavy book. Glare under a reading lamp tires the reader. Matt art paper gives the same colour quality without the reflection.
- 250 gsm cover on a 450-page book. The cover flexes, the spine rounds and the book curls in humid months. Use 300 gsm, or consider hardcover.
- Saddle stitching a 64-page booklet. It will not stay closed and the middle pages will stick out after trimming. Above about 48 pages, perfect bind it.
- Choosing bright white bond for a long novel. Technically fine, but the glare and stiffness make a 300-page read less comfortable than cream maplitho. Save bond for workbooks and theses.
How we handle this at Malka Xerox Centre
At our shop in Kapoorthala, Lucknow, the spec conversation is the first thing that happens on any book job, whether the customer is standing at the counter or messaging from Indore or Guwahati. We ask what the book is for, who will read it, how long it is and whether it will travel by courier. From those answers we suggest a size, a paper and a cover, and we explain the trade-off behind each one rather than just naming a gsm.
We stock 70 and 80 gsm maplitho and bond for text, 100 to 130 gsm art paper in matt and gloss for colour, and 250 and 300 gsm art card for covers, laminated in-house. All four binding styles, perfect, hardcover, spiral and wiro, and saddle stitch, are done on the premises. Before any run we send a digital proof showing the imposed pages and the cover with the calculated spine, and on bulk orders we print one physical sample so you can feel the paper and see the lamination under real light before committing. Every order carries a GST invoice, and most runs are ready in 2 to 5 working days, after which we pack and courier to any of the 178+ cities we serve.
If you are self-publishing, our self-publishing book printing page and the guide on how to self-publish and print your book in India walk you from manuscript to a boxed, barcoded paperback, including applying for a free ISBN from the Raja Rammohun Roy National Agency at isbn.gov.in. The full range of options sits under book printing, with paperback and hardcover detailed separately.
Key takeaways
- GSM is weight per square metre and a practical proxy for thickness and opacity; it is the first thing to settle on paper gsm for book printing.
- 70 or 80 gsm maplitho for black and white text; 100 to 130 gsm art paper only where colour and photographs need it.
- Bond for writing in, maplitho for reading, art paper for looking at.
- Matt lamination for dark and text-led covers, gloss for bright illustrated ones; 300 gsm board for anything over about 150 pages.
- A5 or 5.5 x 8.5 in for novels and poetry, 6 x 9 in for non-fiction, A4 for textbooks, modules and theses; check imposition before choosing a custom size.
- Spine width is leaves multiplied by caliper plus cover boards; get the number from the printer, not from a guess.
- Bigger trim, heavier gsm and more pages all raise courier weight; choose heavy paper with a reason.
Still not sure whether your book should be 70 or 80 gsm, A5 or 6 x 9, matt or gloss? Send us the page count, a few sample pages and a line about who will read it on WhatsApp +91 97927 57892. We will suggest a spec, calculate the spine for your designer and quote with courier to your city. If you are in Lucknow, walk in to our counter in Kapoorthala any day between 9 AM and 10 PM and we will put the actual papers in your hand. You can also reach us via the contact page.
Frequently asked questions
What does gsm mean in paper for book printing?
GSM stands for grams per square metre and is the weight of one square metre of the paper. Heavier gsm paper is usually thicker and more opaque, so less printing shows through from the other side. It is the main number printers use to describe text and cover paper.
Is 70 gsm or 80 gsm better for printing a book?
Both are standard for black and white books. 80 gsm is a little stiffer, more opaque and feels more premium, while 70 gsm is lighter, cheaper and better for long books or bulk orders that travel by courier. Novels do well on either; textbooks with heavy tables look cleaner on 80 gsm.
Which paper is best for colour pages or photographs in a book?
Coated art paper, usually 100 to 130 gsm. Use 100 gsm for long colour textbooks and magazines, and 115 to 130 gsm for picture books, cookbooks and reports where images fill the page. Matt art paper is easier to read than gloss when there is text beside the pictures.
What is the difference between bond, maplitho and art paper?
Bond is crisp, bright office paper that takes pen ink well, good for workbooks and theses. Maplitho is softer, often cream, uncoated book paper that is comfortable for long reading, the usual choice for novels. Art paper is coated and smooth for colour printing and is not meant to be written on.
Should I choose gloss or matt lamination for my book cover?
Choose matt for dark, text-heavy or literary covers because it hides fingerprints and scuffs. Choose gloss for bright, illustrated covers such as children's books where colour punch matters. Gloss on a black cover shows every mark, so avoid it.
What is the best book size for a novel in India?
A5 (148 x 210 mm) is the standard Indian paperback size and suits most novels. 5.5 x 8.5 in is very close and matches international print-on-demand sizes. 6 x 9 in suits non-fiction and longer books where a wider line helps. A4 is too large for a novel.
How do I calculate the spine width of my book?
Divide the page count by two to get leaves, multiply by the paper caliper (about 0.09 mm for 70 gsm, 0.10 mm for 80 gsm, 0.12 mm for 130 gsm art), then add the two cover boards, roughly 0.6 mm in total for 300 gsm. A 240-page book on 80 gsm is about 12.5 mm. Confirm the figure with your printer, since caliper varies by stock.
Does paper gsm affect courier cost for printed books?
Yes. Heavier paper, larger trim size and more pages all increase the weight of each copy, and couriers charge by weight band. A 400-page A4 book on 130 gsm art paper weighs far more than an A5 on 70 gsm, which matters on bulk consignments to other cities.
What cover thickness should I use, 250 or 300 gsm?
250 gsm art card suits slim books under about 150 pages and magazines, where a flexible cover feels right. 300 gsm is sturdier, resists curling in humid weather and suits most paperbacks, coaching modules and anything that will be handled a lot.
Why do some custom book sizes cost more to print?
Digital presses print on large sheets such as SRA3, and pages are imposed on them before folding and cutting. A5, 5.5 x 8.5 in and A4 divide the sheet cleanly, but odd sizes leave strips of unused paper that are trimmed away and still paid for. Ask your printer to check imposition before fixing a custom trim.
Need this done at Malka Xerox Centre?
Walk in at Shop No.-10, Yadav Market, Near FI Plaza, Chandganj Kapoorthala, Lucknow, Uttar Pradesh 226022, or message us on WhatsApp to check availability.
Message us on WhatsApp