Book Printing & Binding

Paperback vs Hardcover vs Spiral Binding: Which Binding Does Your Book Need?

Quick summary: Choose paperback (perfect binding) for novels, poetry, textbooks and most self-published books of roughly 60 to 500 pages. Choose hardcover (case binding) for library copies, final theses, souvenirs and gift books that must last and stand on a shelf. Choose spiral or wiro when the book must lie flat or fold back fully, such as coaching notes, lab manuals, cookbooks and draft theses. Booklets under about 48 pages should be saddle stitched instead.

Key facts

  • Perfect binding (paperback) suits roughly 60 to 500 pages; the spine is milled, hot-melt glued and wrapped in a 250-300 gsm laminated cover.
  • Case binding (hardcover) uses a sewn or glued book block, endpapers, rigid boards and a cloth or printed wrap with spine lettering.
  • Spiral binding uses a plastic coil through punched holes; wiro uses a double-loop metal wire; both open 360 degrees and lie flat.
  • Saddle stitch (centre staples) is the right choice for booklets up to about 48 pages.
  • Relative cost per copy, lowest to highest: saddle stitch, spiral, perfect bound, wiro, hardcover.
  • Perfect bound and spiral runs are usually ready in 2 to 5 working days; hardcover needs a little longer because boards and glue must cure.
  • Malka Xerox Centre, Kapoorthala, Lucknow, binds all four styles and couriers to 178+ cities with a GST invoice on every order.

Research scholars come to our counter in Kapoorthala every submission season with a pen drive, a thesis of around 180 pages and one question: “Spiral karwa doon ya hard binding?” We always ask what each copy is for. Usually one is for the guide to mark up with a red pen and one is for the university library, and that changes the answer completely. It is the same conversation we have several times a day about paperback vs hardcover vs spiral binding.

Quick answer

Paperback, which printers call perfect binding, is the default for novels, poetry, textbooks and most self-published books between roughly 60 and 500 pages. It gives a neat square spine, prints fast and costs the least per copy of the three for a proper book. Hardcover, or case binding, is for books that must last for years and look right on a shelf: library copies, final theses, souvenirs, gift books. Spiral or wiro binding is for working documents that must lie flat and fold back on themselves: coaching notes, lab manuals, cookbooks, draft theses, training manuals. Under about 48 pages none of these is right and a saddle-stitched booklet is the honest choice. The use case decides, not the budget, and the rest of this guide walks through how we decide at the bench.

Why the binding question matters more than paper or size

Most customers spend their energy on cover design and trim size, and we understand why; those are the things you can see on a screen. But binding is the thing you feel every time the book is opened. It decides whether pages fall out after a semester, whether the book stays open on a kitchen counter, whether the spine can carry a title, and whether a reprint next month looks identical to the first lot.

It also decides what the book costs to post. A hardcover with boards weighs noticeably more than the same page count as a paperback, and when we courier to Delhi, Mumbai, Bengaluru or Kolkata the weight band matters. A spiral book with a thick plastic coil does not stack flat in a carton, so a bulk run of spiral notes takes more boxes than the same run perfect bound. None of this is a reason to pick one binding over another, but it is why, when a customer asks us about paperback vs hardcover vs spiral binding, we ask about the end use before we ask about anything else.

The binding also quietly sets the page-count window you can work inside. Too few pages and a perfect-bound spine has nothing to hold. Too many and a spiral coil becomes a wheel. We will come to the exact ranges below, but the point is that binding, page count and paper are one decision, not three. If you want the paper side of that decision explained, our guide to paper GSM, book size and lamination covers it.

How paperback (perfect binding) is made on the bench

Perfect binding is the method behind nearly every paperback you have ever bought. At our shop in Lucknow it goes like this.

  1. Printing and collating. Inside pages are printed on 70 to 80 gsm paper for black and white, or 100 to 130 gsm art paper for colour, then gathered in order into a loose block.
  2. Milling the spine. The block is clamped and the spine edge is roughened or notched with a milling cutter. This is the step people never see. A smooth spine edge would give the glue almost nothing to grip, so the cutter scuffs the edge so glue can bite into the fibres of every single sheet.
  3. Hot-melt glue. The milled spine passes over a bath of hot-melt adhesive. The glue soaks into the roughened edge and a thin layer sits on the outside to grab the cover.
  4. Cover wrap. The printed cover, usually 250 to 300 gsm art card already laminated gloss or matt, is scored at the spine width and pressed onto the glued block. The cover wraps front, spine and back in one piece.
  5. Trimming. After the glue has set, the book is trimmed on three sides (head, foot and fore-edge) so the pages and cover are perfectly flush. This is why your file needs 3 mm bleed; the trim knife removes it.

The result is the clean square spine you see on a bookshop shelf, with room for the title, author name and publisher mark. Perfect binding is our most common job and the backbone of our paperback book printing and perfect binding service.

Where perfect binding is weak

Glue is strong but it is not a hinge. A perfect-bound book does not want to lie flat; if you force it open and press the spine down repeatedly, the glue line cracks and pages begin to release near the centre. That is fine for a novel you hold in your hands. It is a poor choice for a recipe book that will be propped open with a steel dabba on top.

How hardcover (case binding) is made

Case binding is slower and involves more handwork, which is why it costs more and takes a little longer. The steps:

  1. Book block. The inside pages are either sewn in sections (signatures folded and stitched through the fold with thread, then the sections sewn to each other) or glued like a perfect-bound block. Sewn blocks last longest and open better; glued blocks are quicker and suit most modern short-run hardcovers.
  2. Endpapers. A folded sheet of heavier paper is glued to the first and last page of the block. Half of each endpaper will later be pasted to the inside of the board, and this is what actually holds the block in its case.
  3. Spine reinforcement. A strip of mull (a stiff cotton gauze) and a paper liner are glued along the spine to add strength and to hinge the block to the case.
  4. Boards and case. Two rigid grey boards and a spine strip are cut to size, slightly larger than the trimmed block so the book has the protective overhang called the square. They are covered with either book cloth (often with gold or silver foil lettering) or a full-colour printed and laminated paper wrap pasted over the boards.
  5. Casing in. The block is set into the case, the endpapers are pasted down to the boards, and the whole book is pressed while the glue cures. Pressing matters; a book pulled out too early warps.
  6. Spine lettering. On cloth cases, the title and author are foil-stamped or screen-printed on the spine and sometimes the front board. On printed wraps, the spine text is part of the artwork.

Because the block is held by endpapers and hinged with mull, a case-bound book opens wider than a perfect-bound one and survives years of handling. That is why most universities ask for hard binding on the final deposited thesis, and why we recommend it for anything that will be gifted, archived or shelved in a library. Our hardcover book printing page lists the cloth colours and wrap options we keep.

How spiral, wiro and saddle stitch are made

These are the mechanical bindings, where no glue holds the pages together.

Spiral (coil) binding

The printed block is squared up and a row of round holes is punched along the binding edge. A plastic coil is then wound through the holes by machine and the ends are crimped so it cannot unwind. The standard build is a clear acetate sheet on the front so the first page shows through, and a stiff board on the back so the book has something to rest on. The result opens a full 360 degrees; you can fold the cover right round to the back and the book stays exactly where you leave it.

Wiro (wire-o) binding

Wiro uses a double-loop metal wire instead of a plastic coil, and the holes are usually square or rectangular. The wire is pushed through the holes and then closed with a press. Two things make wiro different from spiral in practice: the pages line up perfectly when the book is open (a spiral coil shifts facing pages up or down by one pitch), and the metal looks more formal, which is why calendars, presentation decks and company reports often use it. The trade-off is that wire can be bent out of shape if a heavy bag is dropped on it, while a plastic coil springs back. Both are covered on our spiral and wiro binding page.

Saddle stitch for thin booklets

For booklets up to about 48 pages, we fold the printed sheets in half, nest them, and drive two wire staples through the fold. The page count must be a multiple of four because every sheet gives four pages. There is no spine to speak of, which is why asking for spine text on a 40-page saddle-stitched booklet is one of the counter mistakes we describe further down. Saddle stitch is right for prospectuses, event programmes, poetry chapbooks, short catalogues and school magazines that run a few dozen pages.

Paperback vs hardcover vs spiral binding: side-by-side comparison

This is the table we would sketch for you on the back of a job sheet at the counter, written out properly.

FeaturePaperback (perfect bound)Hardcover (case bound)Spiral / WiroSaddle stitch
How it is heldHot-melt glue on a milled spineSewn or glued block, endpapers, boardsPlastic coil or metal wire through punched holesTwo staples through the fold
Page-count rangeRoughly 60 to 500 pagesRoughly 60 to 600+ pagesAbout 20 to 400 pages depending on coil size8 to about 48 pages
Lies flatNoPartly, better if sewnYes, opens 360 degreesYes when open at the centre
Printed spineYesYes, foil or printedNo usable spineNo spine
DurabilityGood for normal readingBest, lasts yearsGood; coil outlasts the pagesFair; staples can tear thin paper
Shelf appearanceBookshop standardPremium, library standardWorkbook or manual lookPamphlet look
Relative cost per copyLow to mediumHighestLow (spiral) to medium (wiro)Lowest
Usual turnaround2 to 5 working daysSlightly longer, boards must cureOften fastest for small lotsFast
Reprint easeEasy, identical spineEasy but costlier per copyEasiestEasiest
Colour cover handlingFull-colour laminated wrapPrinted wrap or cloth with foilClear front sheet or printed card frontSelf-cover or heavier card cover

Durability, lie-flat behaviour and shelf appearance

These three qualities are where paperback vs hardcover vs spiral binding stops being a price question and becomes a question of how the book will be used.

Durability

Hardcover wins, and not by a small margin. The boards protect the corners, the endpapers and mull carry the load, and a sewn block will survive decades of lending. A perfect-bound paperback is strong enough for the life of a normal reading book, which is to say it will outlast your interest in it, but it is not meant to be bent backwards. Spiral and wiro are an interesting case: the binding itself almost never fails, but the holes in the paper can tear if the book is yanked around a school bag for a year, especially on 70 gsm stock. For coaching material that will be used hard, we often suggest stepping up to 80 gsm so the punched edge holds.

Lie-flat behaviour

If the book must stay open without a hand on it, you want spiral or wiro. Full stop. Cookbooks, lab manuals, music scores, sketch and workbooks, anything a student writes in while reading, all behave better on a coil. A sewn hardcover opens reasonably flat and is the choice when you want both lie-flat behaviour and a proper shelf presence, for instance an institutional cookbook or a company history. A glued paperback will fight you.

Shelf appearance

A perfect-bound book looks like a book. A hardcover looks like a book that matters. A spiral-bound book looks like a manual, which is exactly right for a manual and exactly wrong for a poetry collection you want in a bookshop window. We say this gently to first-time authors who ask for spiral because it is cheaper: if your reader is meant to buy it, bind it as a paperback. If your reader is meant to study from it, bind it with a coil.

Page-count limits and spine width

Each binding works inside a window, and the window is set by physics, not by our preference.

  • Perfect binding needs enough thickness for the glue to grip and for a cover to wrap round. In practice that means roughly 60 pages on 70 gsm as a sensible minimum; below that the spine is a few millimetres and the glue line is fragile. The upper comfortable limit is around 500 pages, after which the book gets heavy in the hand and the spine strains when opened. Spine width depends on page count and the caliper (thickness) of the paper, so 300 pages on 80 gsm give a wider spine than 300 pages on 70 gsm, and colour pages on 130 gsm art paper are wider again. Our print-ready PDF guide explains how we calculate it for your cover file.
  • Case binding handles the same lower limit and goes higher, because the sewn or glued block is supported by boards. Very thin hardcovers, such as a 48-page children's picture book, are possible but need a lighter board and careful handling.
  • Spiral and wiro are governed by coil or wire diameter. Small coils suit a few dozen pages; the largest practical coils handle a few hundred. Past that, the coil is wider than a thumb and the book flops. For a 600-page coaching compilation, we would split into two volumes rather than fight one giant coil.
  • Saddle stitch tops out around 48 pages on 80 gsm because the inner pages creep outward at the fold and the staples struggle. Thicker paper lowers that limit.

Practical tip: before you finalise the layout, tell us the page count and paper you intend to use and we will give you the spine width to set in your cover file. Change the paper later and the spine changes too, so lock paper first, then design the cover.

Cost ordering, turnaround and reprint ease

We are not quoting rupees here because paper, colour and quantity move the figure far more than binding alone; for that side, see our post on what decides book printing cost per copy. But the ordering between bindings, holding everything else equal, is steady:

  1. Saddle stitch is cheapest, because it is two staples and a fold.
  2. Spiral comes next: punching and a plastic coil are quick and the materials are inexpensive.
  3. Perfect binding sits in the middle: a laminated card cover and glue, with a trim.
  4. Wiro costs a little more than spiral, because the wire is pricier and closing it is slower.
  5. Hardcover costs the most, because boards, endpapers, mull, cloth or printed wrap and spine lettering all add material and handwork, and the book needs pressing time.

On turnaround, most perfect-bound, spiral and saddle-stitched runs leave our bench within 2 to 5 working days once the proof is approved. Hardcover usually needs a day or two more for the case to be made and the glue to cure under press. Tracked courier adds 2 to 5 working days depending on city tier, so a hardcover order for Hyderabad or Chennai should be planned a week or so ahead of the date you need it in hand.

Reprints are easy with every method as long as we keep your files, which we do. The one thing to watch is spine width on a perfect-bound reprint: if you add or remove a chapter, the spine changes and the cover must be re-set. Spiral reprints do not have that problem because there is no printed spine to begin with.

How each binding handles colour covers

Almost every book we bind has a full-colour cover, but each binding carries it differently.

  • Paperback: the cover is one flat sheet printed on 250 to 300 gsm art card, laminated gloss or matt on the printed side, scored and wrapped. Gloss makes colours pop and resists finger marks; matt looks subtler and suits literary titles. Spot UV and foil are possible on request.
  • Hardcover: you choose between a printed paper wrap pasted over the boards (full-colour artwork front, spine and back, usually matt laminated) or book cloth with foil lettering and, if you like, a separate printed dust jacket. Thesis copies normally take cloth with gold spine lettering because that is what most universities specify.
  • Spiral and wiro: the simplest build is a clear acetate front so your printed first page acts as the cover, with a plain board at the back. For a more finished look, we print the cover on art card, laminate it, and punch it along with the pages so the coil runs through the cover as well. The spine remains a coil, so put the title on the front, not the edge.
  • Saddle stitch: either self-cover, where the cover is the same paper as the inside, or a heavier laminated card cover stapled on with the block. Lamination should go on the outside face only; laminating both sides of a saddle-stitched cover makes the fold crack.

Which binding for which book: the use-case guide

This is the heart of paperback vs hardcover vs spiral binding, so here it is as a table first and then with the reasoning.

If you are printing...ChooseBecause
A novel or short story collectionPaperbackBookshop standard, printed spine, comfortable in the hand, lowest cost for a proper book
A poetry collectionPaperback (saddle stitch if under 48 pages)Matt laminated cover suits the genre; chapbooks are too thin for a glued spine
A school or college textbookPaperback on 80 gsmSurvives a year of use, stacks and ships well in bulk
Coaching institute notes and test seriesSpiralLies flat for solving, pages can be folded back, cheapest for frequent batch reprints
A lab manual or workbook students write inSpiral or wiroOpens 360 degrees and stays open on the bench
Thesis draft for the guideSpiralCheap, quick, easy to annotate and discard after corrections
Final thesis for submissionHardcover, cloth with gold spine letteringMost universities require it and it lasts in the library
A cookbookWiro or sewn hardcoverMust stay open on the counter; wiro for home use, sewn hardcover for a gift edition
A children's picture bookHardcover, or paperback on thick stockSmall hands are rough; boards protect corners and survive the floor
Company annual report or project reportPerfect bound or wiroPerfect bound for a formal document with a spine; wiro for a presentation deck that flips
A magazine or newsletterSaddle stitch (perfect bound above 48 pages)Thin issues fold and staple cleanly; thick anniversary issues get a glued spine
A souvenir, felicitation volume or family historyHardcover with printed wrapMeant to be kept and displayed for years

Novels, poetry and other trade books

Paperback, almost always. A 6x9 inch or 5.5x8.5 inch perfect-bound book with a matt or gloss laminated cover is what readers expect to pay for, and it is what fits in a courier envelope to a reader in Pune or Jaipur without special packing. Authors sometimes ask for a small hardcover run alongside the paperback for gifting and launch events; that works well and both can come off the same inside files.

Textbooks and coaching material

For a textbook that will be read, perfect binding on 80 gsm is the right answer. For a question bank or notes that a student solves in, spiral is better because the book lies flat and the student is not fighting the spine while writing. Many institutes in Kota, Patna and Lucknow send us both: a perfect-bound theory book and spiral-bound practice sets. Our study material printing for coaching institutes page goes into batch sizes and reprint cycles.

Thesis, draft and final

This is the clearest case of using two bindings for one book. Draft copies for the supervisor go spiral, because they are cheap and will be scribbled on and thrown away. The final submission goes hardcover in the cloth colour and lettering your department asks for. Details on what universities typically specify are in our thesis and dissertation binding guide and on the thesis printing and binding service page.

Cookbooks and manuals

Anything that must stay open while the reader does something with both hands should be wiro or spiral, or a sewn hardcover if it is also a gift. We print the pages on 100 to 130 gsm art paper when there is food photography, because colour on thin paper shows through from the other side.

Children's books

Picture books are usually short, 24 to 40 pages, which puts them under the comfortable limit for perfect binding. The options are a thin hardcover, a saddle-stitched book on heavy stock, or a paperback padded out with thicker paper. Hardcover is the one that survives being chewed, dropped and stood on. Our children's book printing page shows the formats we recommend.

Reports, magazines and souvenirs

A company report that will sit in a boardroom cupboard looks right perfect bound with a printed spine. A deck that will be flipped through in a meeting is better on wiro. Magazines follow the 48-page rule: staple below it, glue above it. Souvenirs and felicitation volumes, which are made to be kept, deserve hardcover with a printed wrap and a lamination that will not scuff.

When to combine bindings

Some of the best-planned jobs we see use more than one binding from the same files.

  • Spiral draft, hardbound final. The classic thesis path. Two or three spiral copies for review, then three to five hardcover copies for submission and family.
  • Paperback main run, small hardcover gift run. Authors print 50 to 100 paperbacks for sale and 5 to 10 hardcovers for the launch table, dedications and their own shelf. Same inside PDF, two cover files.
  • Perfect-bound theory, spiral practice. Coaching institutes split the course into a bound textbook that lasts the year and spiral workbooks that are consumed and replaced per batch.
  • Saddle-stitched sampler, perfect-bound full edition. Poets and small publishers sometimes print a 24-page stapled sampler to hand out at readings and a full perfect-bound collection to sell.

Combining bindings costs nothing extra in setup because the inside file is shared. The only thing that changes between versions is the cover file, and we will tell you the spine width for each.

Mistakes we see at the counter

These are the recurring ones. None of them is a disaster if caught before printing, and all of them are expensive after.

  1. Too few pages for perfect binding. A 32-page poetry chapbook with a glued spine will have a spine of about 2 mm and will start shedding pages quickly. Below roughly 60 pages, go saddle stitch, or increase paper weight if you genuinely need a square spine.
  2. Spine text on a 40-page book. There is no spine on a saddle-stitched booklet and the spine on a very thin perfect-bound book is too narrow to carry legible type. Leave spine text off until you have at least a centimetre to work with.
  3. Laminating the wrong side. Lamination goes on the printed outer face of the cover. We have had files arrive where the designer set lamination on the inside, or asked for both sides on a saddle-stitched cover, which makes the fold crack. Ask us; we will tell you what the binding needs.
  4. Cover set for the wrong spine width. The designer assumed 70 gsm, the author chose 80 gsm, and now the spine text wraps onto the front. Confirm paper before the cover is finalised.
  5. Spiral for a book meant to be sold. It is cheaper, but it does not sit on a shelf, has no spine and signals “manual” to a buyer. Paperback is worth the small difference.
  6. Hardcover for a 400-page draft that will be thrown away. Spend that money on the final copy instead.
  7. Odd page counts for saddle stitch. Pages must be a multiple of four. We can add blank pages, but it is better to plan for it.
  8. Thin paper under a coil for heavy use. Coaching notes on 70 gsm that will be used daily for a year are better on 80 gsm so the punched holes do not tear.

How we handle this at Malka Xerox Centre

We have been binding books at Shop No. 10, Yadav Market, Kapoorthala, Lucknow since February 2013, and the routine for every order is the same whether it is three thesis copies or a thousand coaching workbooks.

  • You tell us the end use, page count and quantity, and we recommend a binding, paper and cover finish. You can message or send files on WhatsApp +91 97927 57892, or visit; we are open 7 days a week, 9 AM to 10 PM.
  • We send a digital proof before anything is printed. On bulk runs we also make one physical sample so you can hold the paper, check the spine and see the lamination before we commit the full lot.
  • Trim sizes we run routinely are A5 (148 x 210 mm), A4, 5.5 x 8.5 inch, 6 x 9 inch and custom sizes. Inside pages are black and white on 70 to 80 gsm or colour on 100 to 130 gsm art paper. Covers are 250 to 300 gsm art card with gloss or matt lamination, printed spine and ISBN barcode as supplied.
  • Most perfect-bound, spiral and saddle-stitched runs are ready in 2 to 5 working days after proof approval; hardcover usually a little longer.
  • Every order carries a GST invoice.
  • Delivery is tracked courier to 178+ cities, typically 2 to 5 working days depending on city tier. We regularly ship to Delhi, Mumbai, Bengaluru, Hyderabad, Kolkata, Pune, Jaipur, Patna, Varanasi and Kanpur, and you can check your city on our city-wise book printing and binding pages, for example book printing and binding for Delhi.

If you want to see everything we bind in one place, start at book printing or our book binding service page, and for larger quantities see bulk book printing.

Key takeaways

  • Paperback (perfect binding) for novels, poetry, textbooks and most self-published books of roughly 60 to 500 pages.
  • Hardcover (case binding) for final theses, library copies, souvenirs, children's books and anything meant to last for years.
  • Spiral or wiro when the book must lie flat or fold back: coaching notes, lab manuals, cookbooks, draft theses, training manuals.
  • Saddle stitch for anything up to about 48 pages; no spine text, page count in multiples of four.
  • Cost per copy from lowest to highest: saddle stitch, spiral, perfect bound, wiro, hardcover. Turnaround is 2 to 5 working days for most, a little more for hardcover.
  • Lock your paper before designing the cover, because spine width depends on page count and paper caliper.
  • Combining bindings from the same files (spiral draft, hardbound final; paperback run plus a few hardcovers) costs nothing extra in setup.

If you are still weighing paperback vs hardcover vs spiral binding for your own book, send us the page count, what the book is for and roughly how many copies you need. We will suggest a binding, a paper and a cover finish, send a digital proof, and courier the finished books anywhere in India. Message us on WhatsApp +91 97927 57892 or reach us through the contact page.

Frequently asked questions

What is the difference between paperback and perfect binding?

They are the same thing. Perfect binding is the printer's name for the method used to make a paperback: the spine edge of the page block is milled, coated with hot-melt glue and wrapped in a laminated card cover, then trimmed flush on three sides. When we say paperback we mean a perfect-bound book.

How many pages do I need for perfect binding?

Roughly 60 pages on 70 to 80 gsm paper is a sensible minimum so the spine is thick enough for glue to hold and for a cover to wrap. Below that we recommend saddle stitch. The comfortable upper limit is around 500 pages, after which the book becomes heavy and the spine strains.

Is spiral binding or hardcover better for a thesis?

Use both. Spiral copies are cheap and quick for your guide to mark up during review. The final submission copy should be hardcover with cloth and gold spine lettering, which is what most universities ask for and what lasts in the library. We print both from the same PDF.

What is the difference between spiral and wiro binding?

Spiral uses a continuous plastic coil wound through round holes; wiro uses a double-loop metal wire pushed through square holes and closed. Both open 360 degrees and lie flat. Wiro keeps facing pages aligned and looks more formal, while spiral is cheaper and the plastic springs back if bent.

Can a spiral-bound book have a printed spine?

No. The spine of a spiral or wiro book is the coil or wire itself, so there is no surface for a title. If you need a spine that reads on a shelf, choose perfect binding or hardcover. On a spiral book, put the title on the front cover and, if you like, on a printed back board.

Which binding lies flat when open?

Spiral and wiro lie completely flat and can fold back on themselves. A sewn hardcover opens fairly flat. A perfect-bound paperback does not lie flat and should not be forced, because pressing the spine cracks the glue line and pages can loosen near the centre.

Which binding is cheapest per copy?

Holding paper, colour and quantity equal, the order from cheapest to most expensive is saddle stitch, spiral, perfect bound, wiro, then hardcover. Hardcover costs the most because boards, endpapers, cloth or printed wrap and spine lettering add material and handwork.

How long does hardcover binding take compared to paperback?

Most perfect-bound, spiral and saddle-stitched runs are ready in 2 to 5 working days after proof approval. Hardcover usually needs a day or two more because the case has to be made and the glue cured under press. Add 2 to 5 working days for tracked courier depending on your city.

What binding should I choose for a children's picture book?

Hardcover is the most durable choice because the boards protect corners and survive rough handling. Picture books are usually 24 to 40 pages, which is too thin for a reliable perfect-bound spine, so the alternatives are saddle stitch on heavy paper or a paperback on thicker stock.

Can I print some copies as paperback and some as hardcover from the same file?

Yes. The inside PDF is shared; only the cover file changes because a hardcover wrap has different dimensions and spine width. Many authors print a main paperback run with a small hardcover run for launches and gifts, and we quote both from one set of files.

Need this done at Malka Xerox Centre?

Walk in at Shop No.-10, Yadav Market, Near FI Plaza, Chandganj Kapoorthala, Lucknow, Uttar Pradesh 226022, or message us on WhatsApp to check availability.

Message us on WhatsApp

Sami Jaiswal

Written by the team at Malka Xerox Centre, Kapoorthala, Lucknow.

Chat on WhatsApp
Call WhatsApp Book