Book Printing & Binding

Thesis and Dissertation Printing and Binding in India: Formats, Colours and Spine Rules

Quick summary: Thesis printing and binding in India is governed by each university's own guideline document, but most ask for A4 pages on 80 gsm paper, 1.5 line spacing, a wider binding margin, a set number of hard-bound copies with gold spine lettering, and signed certificate and declaration pages bound in a fixed order. Draft copies for the guide are usually spiral bound; final copies are hard bound in a cover colour often set by faculty. Malka Xerox Centre in Lucknow offers same-day thesis binding and couriers to students across India.

Key facts

  • Your university guideline document is the only authority on thesis format, copy count and cover colour
  • A4 size, 80 gsm bond paper and 1.5 line spacing are the most common patterns across Indian universities
  • Draft copies for guides are usually spiral bound; final submission copies are hard bound with gold spine lettering
  • Many universities assign hard-binding colours by faculty, such as black, maroon or blue; confirm yours before binding
  • Certificate and declaration pages must be printed on letterhead and signed before binding, in the order the guideline lists
  • Colour printing is needed only on pages with figures; the rest can be black and white
  • Same-day thesis binding is possible at our Kapoorthala counter in Lucknow; courier to other cities takes 2 to 5 working days

A research scholar reached our counter in Kapoorthala at four in the afternoon with a pen drive, a viva the next morning, and a request for three hard-bound copies in maroon. We opened the PDF, and the certificate page was blank where the supervisor’s signature should have been. He had the signed original in his bag, which saved the day, but it is the kind of small thing that turns a two-hour job into a frantic evening. This guide is everything we wish every student knew before that moment.

Quick answer

Thesis printing and binding in India follows one rule above all others: your own university’s guideline document decides the format, the number of copies, the cover colour and the spine text, and nothing a printer says overrides it. Across most Indian universities the common pattern is A4 pages on 80 gsm paper, 1.5 line spacing, a wider margin on the binding side, a few spiral-bound draft copies for the guide, and a fixed number of hard-bound final copies with gold lettering on the spine and front cover. Certificate and declaration pages go on institute letterhead, signed before binding, placed in the order the guideline lists. We do same-day thesis binding at Malka Xerox Centre in Lucknow and courier finished copies to students in Delhi, Prayagraj, Varanasi, Patna, Bhopal and beyond.

Your university guideline is the only authority

Every university, and often every faculty within it, publishes a document with a name like “Guidelines for Submission of Thesis” or “Format for Ph.D. Thesis”. It is usually a PDF of 6 to 20 pages on the research section of the university website, or available from the department office. Download it before you print anything, and bring a copy, printed or on your phone, when you come to the counter.

We say this at the start because students regularly arrive with instructions passed down verbally from a senior who submitted three years ago. Guidelines change. Copy counts change when a university moves to digital repositories. Colours change when a faculty is reorganised. We can tell you what we see most often, and we do below, but we cannot tell you what your department will accept this year. When a student asks us “bhaiya, colour kaunsa hoga?” the honest answer is “jo aapke guideline mein likha hai”, and then we help them find the line.

If the guideline is silent on a point (many say nothing about paper gsm, for example), the sensible move is to ask the research section or your supervisor by email so that you have a written answer, then follow the common pattern we describe here.

Common patterns across Indian universities

Although the details differ, thesis format guidelines across Indian universities share a recognisable shape. The table below collects what we see most often at our counter from students of Lucknow University, BBAU, AKTU-affiliated engineering colleges, KGMU, SGPGI and IET, and from students who courier files to us from other states. Treat every row as “usually”, and check your own document.

ElementCommon patternWhat to check in your guideline
Page sizeA4 (210 x 297 mm)A few programmes still allow or require other sizes; confirm
Printing sidesOne-sided for PhD in many universities; double-sided increasingly accepted to reduce bulkWhether double-sided is permitted, and whether chapters must start on a right-hand page
Line spacing1.5 for body text; single for quotations, footnotes, tables and referencesSpacing for abstract and references
MarginsBinding side (left) about 1.5 inch or 3.5 to 4 cm; other sides 1 inch or 2.5 cmExact figures; some ask for a wider top margin on chapter openers
Font and sizeTimes New Roman 12 point is the most common body font; headings 14 to 16 pointPermitted fonts, size for footnotes and captions
Hard-bound copiesThree to five, split between library, department, supervisor and candidateExact count, and whether examiners receive spiral or hard-bound copies
Soft copyCD or USB with the full PDF, often fixed inside the back cover pocketFile format, naming, and whether a repository upload replaces the disc
Certificate and declarationOn institute letterhead, signed by candidate, supervisor and often the head of department before bindingWording templates and the order of these pages
Plagiarism reportSimilarity report summary page bound in, usually after the certificateWhether the full report or only the first page is required
Cover colourAssigned by faculty or degree; black, maroon and navy blue are commonThe exact colour name and whether M.Phil differs from PhD
Spine textTitle (short form if long), candidate name, degree, year, universityOrder of items and whether the university emblem is required

Nursing, law, M.Ed and MBA dissertations follow the same general shape but are usually shorter, between 60 and 150 pages, and sometimes allow spiral binding even for the final copy. M.Tech and MBA project reports in AKTU-affiliated colleges often ask for hard binding with a college-specific colour, so the engineering student next to you in the queue may need a different cover from a management student of the same university.

Draft copies for your guide versus final hard-bound copies

Thesis printing and binding happens in two distinct stages, and students save money and time when they treat them differently.

Draft and pre-submission copies

Your supervisor will want to read the full draft at least once, and often twice. The research section may ask for a pre-submission copy for the committee, and the synopsis or summary usually goes separately. These copies are working documents. Spiral binding is ideal: it opens 360 degrees, lies flat for marking, and costs a fraction of hard binding. Print single-sided on 70 or 80 gsm, use a clear plastic front sheet and a card back, and do not worry about colour figures unless a figure cannot be judged in black and white. When the supervisor returns it with corrections, the spiral copy has done its job. Our spiral and wiro binding page lists the coil sizes we stock, and the post on spiral versus hard binding for a thesis goes deeper into the comparison.

Final submission copies

Final copies are the permanent record. They go to the university library, the department, the supervisor, and one stays with you. These are hard bound: the text block is sewn or thermally bound, rigid boards are wrapped in cloth or rexine in the faculty colour, the title and details are stamped in gold on the spine and front cover, and the endpapers hold everything together. Print these on 80 gsm, use colour only on the pages that need it, and insert the signed certificate pages. We describe the construction on our hardcover book printing page, and the general trade-offs in paperback versus hardcover versus spiral binding.

One practical suggestion: print the final text once, check one copy page by page, and only then let us run the remaining copies. It costs an extra hour and it has caught more mistakes than any other step.

Hard binding colours by faculty

Many Indian universities assign the hard-binding cover colour by faculty or degree. The idea is that a shelf in the central library can be read at a glance: one colour for science, another for arts and humanities, another for commerce and management, another for engineering or medicine. Black, maroon, navy blue, dark green and brown all appear in guidelines we have seen, and some universities use one colour for everything while others distinguish M.Phil from PhD.

We deliberately do not publish a list of “university X uses colour Y”. These assignments change, and a student who binds five copies in the wrong colour has to pay for five new covers. Instead:

  • Find the colour in your guideline document and read the exact wording. “Maroon” and “dark red” may be the same thing to a binder but not to a library clerk.
  • If the guideline gives only a colour name, ask your department for a sample copy from a previous year and photograph the cover in daylight. Bring the photo to the counter.
  • If the guideline specifies a material (cloth, rexine, leatherette) as well as a colour, mention both when you order. We keep the common colours in stock in rexine and cloth; unusual shades may take an extra day to source.
  • Confirm whether the lettering should be gold or silver. Gold is the norm, but a few institutes specify silver on dark blue.

Gold spine lettering and front cover embossing

The spine of a hard-bound thesis is what the library sees for the next thirty years, so guidelines are usually specific about it. The common content, reading from top to bottom or along the spine, is the thesis title (shortened if it will not fit), the candidate’s name, the degree, and the year. Some add the university name or emblem at the foot. Lettering is foil-stamped in gold, and the text runs along the spine so that it reads correctly when the book lies flat with the front cover up.

Spine width depends on page count and paper caliper. A 150-page thesis on 80 gsm with board covers gives a spine of roughly 15 to 18 mm, enough for two lines of lettering. A 400-page PhD gives a far wider spine and room for the full title. If your title is long, the guideline often permits a short form on the spine while the full title goes on the front cover and title page. Prepare that short form yourself rather than leaving a binder to guess which words to cut.

The front cover usually repeats the title page in gold: full title, “A thesis submitted to [University] for the degree of Doctor of Philosophy in [Subject]”, candidate name, supervisor name, department, and year. Many guidelines also require the university emblem embossed above the title. Bring the emblem as a clean vector or high-resolution file; a logo copied from a website at 72 dpi stamps badly. Check the capitalisation and spelling of every name on the cover against the certificate page before you approve the stamping, because gold foil cannot be corrected once pressed.

Putting certificate, declaration and plagiarism pages in the right order

This is where most re-binds happen. The front matter of a thesis follows a sequence set out in the guideline, and the library checks it. A typical order looks like the list below, though your guideline may swap or add items.

  1. Title page (same text as the front cover, printed on plain paper).
  2. Certificate from the supervisor, on institute or department letterhead, signed and dated, sometimes countersigned by the head of department or dean.
  3. Declaration by the candidate that the work is original, signed and dated.
  4. Plagiarism or similarity report summary, often with a certificate from the library or research section stating the similarity index.
  5. Acknowledgements.
  6. Abstract or summary.
  7. Table of contents, list of tables, list of figures, list of abbreviations.
  8. Chapters.
  9. References or bibliography.
  10. Appendices, publications arising from the thesis, and sometimes a copy of the synopsis.

The certificate and declaration must be signed before binding. We cannot open a hard-bound book to slip in a signed page without damaging it. Print as many letterhead copies as you have final copies plus two spares, get every signature on every copy, and keep them flat in a folder. Letterhead is usually 80 to 100 gsm and sometimes slightly different in shade from your body paper; that is normal and accepted. If your plagiarism report runs to 40 pages, most guidelines want only the summary page or the first page bound in; put the full report on the CD.

Practical tip: before you leave the department with your signed certificates, photograph every signed page. If a copy goes missing or a signature is smudged, you will know exactly which page to redo, and the photo is evidence that the signature existed on that date.

Colour figures, paper choice and double-sided printing

Print colour only where it is needed

A 300-page thesis with twelve colour figures should not be printed in colour throughout. Mark the pages that genuinely need colour (microscopy images, GIS maps, spectra, charts where colour carries meaning) and let us print only those pages in colour on the same 80 gsm sheet, or on 100 gsm if the image is dense. Everything else goes black and white. When you send the PDF, include a simple list such as “colour on pages 47, 48, 112, 113, 200 to 206”. If your figures use colour only for decoration, convert them to greyscale and make sure the lines remain distinguishable; examiners read many theses and a clear greyscale chart is better than a muddy colour one.

Paper

80 gsm bond or copier paper is the common standard for thesis body pages in India, and it is what we recommend unless your guideline says otherwise. It is opaque enough for single-sided printing, stiff enough to turn cleanly, and thin enough that a 400-page thesis remains a manageable book. A few guidelines ask for “executive bond” or 90 to 100 gsm; follow them. We advise against 70 gsm for final copies because text from the reverse shows through on double-sided pages. Our paper and GSM guide explains the differences in more detail.

Single or double sided

Older guidelines insist on single-sided printing. Many universities now accept or encourage double-sided printing to reduce bulk, especially for theses above 300 pages. If double-sided is allowed, set mirror margins in your document so that the wider margin falls on the binding side of every page, and start each chapter on a right-hand (odd) page, inserting a blank where needed. Tell us which you want before we print, since changing the choice afterwards means reprinting the entire text.

Preparing the PDF for thesis printing

A clean PDF is the single largest time-saver in thesis printing and binding. Word files reflow between computers, fonts substitute, and equations shift; a PDF freezes the layout you approved. Before you export:

  • Set the page size to A4 in the document itself, not in the print dialog. Check that no page has been left at Letter size from a template.
  • Apply the margins from your guideline, with the wider margin on the binding side. For double-sided printing use mirror margins.
  • Number the front matter in lower-case roman numerals (i, ii, iii) and the main text in arabic numerals (1, 2, 3) starting from the first page of Chapter 1. Most guidelines want page numbers at the bottom centre or top right; follow yours. The title page usually carries no visible number.
  • Embed all fonts. In Word, use Save As PDF with “ISO 19005-1 compliant (PDF/A)” or the “embed fonts” option; in LaTeX, pdflatex embeds fonts by default. Symbols, Greek letters and equation fonts are the first to break when fonts are not embedded.
  • Check the table of contents against the actual page numbers after the final export. A regenerated TOC that was not refreshed is a classic re-bind reason.
  • Insert placeholder pages for the certificate and declaration so that page numbering stays continuous when we swap in the signed letterhead sheets.
  • Export images at print resolution. Figures pasted at screen resolution print soft; 300 dpi at the printed size is the safe target.
  • Open the PDF on a different computer or phone before sending it. If it looks right there, it will print right here.

Our guide on print-ready PDFs, margins and spine covers the technical side, and the print a book from PDF page lists what we need from you.

Thesis printing and binding timelines: same-day in Lucknow, courier elsewhere

Students in Lucknow

Our counter at Shop No. 10, Yadav Market, Kapoorthala is open seven days a week from 9 AM to 10 PM, and students from Lucknow University, BBAU, IET, KGMU, SGPGI and the AKTU-affiliated engineering and management colleges around the city come to us for thesis printing and binding through the year. For spiral copies, walk in with the PDF and leave with the books within a few hours. For hard binding, same-day turnaround is possible for three to five copies if you arrive in the morning with a final PDF, signed certificates and the colour confirmed; the gold stamping and board work need a few hours to set properly. Arriving at 7 PM with a submission at 10 AM the next day is possible, and we have done it many times, but it leaves no room for a misprint. Submission week at any university is also peak time for every printer in the city, so give yourself a day if you can.

Students elsewhere in India

Students in Delhi, Prayagraj, Varanasi, Patna, Bhopal, Kanpur, Gorakhpur and other cities send us files on WhatsApp or email, approve a digital proof, and receive the finished copies by tracked courier. Most thesis jobs are ready within 1 to 2 working days, and courier adds 2 to 5 working days depending on the city; Delhi, Kanpur, Prayagraj and Varanasi are usually quicker than Hyderabad, Chennai or Bengaluru. Hard-bound copies travel well when packed flat with corner protection, and we wrap each copy separately. The one thing that cannot travel by email is the signed certificate: either courier the signed letterhead sheets to us before we bind, or ask your department whether a scanned signature is acceptable for the bound copies (some accept it, many do not). Allow at least a week from file approval to submission if you are outside Lucknow. Our Delhi and Patna pages describe city-specific timings, and the cities hub covers the rest.

Checklist before you come to the counter

Students who arrive with these items in hand usually leave with finished copies the same day. Students who arrive without them usually make a second trip.

ItemWhy it mattersStatus
University guideline PDF (on phone or printed)Settles every format question on the spotRequired
Final thesis PDF with embedded fonts, A4, correct marginsWhat you approve is what we printRequired
Signed certificate and declaration pages on letterhead, one set per copy plus sparesCannot be inserted after hard bindingRequired for final copies
Plagiarism report summary page, as many as copiesBound in after the certificate in most guidelinesUsually required
Cover colour name and, ideally, a photo of a previous year’s copyPrevents the most expensive mistakeRequired for hard binding
Exact spine and front cover text, including short titleGold foil cannot be correctedRequired for hard binding
University emblem as a vector or high-resolution fileLow-resolution logos stamp badlyIf the guideline requires it
List of colour pagesKeeps cost down and avoids missed figuresRecommended
Number of hard-bound and spiral copiesLibrary, department, supervisor, candidate, examinersRequired
CD or USB with the PDF, if required, and its label textOften fixed in a pocket inside the back coverIf the guideline requires it
Single or double-sided decisionCannot be changed after printingRequired

Mistakes in thesis printing and binding that force a re-bind

A re-bind means cutting a finished hard-bound book apart, reprinting or reinserting pages, and binding again. It costs time you do not have in submission week. These are the causes we see most often, in roughly the order of frequency.

  1. Wrong order of front-matter pages. Declaration before certificate, or acknowledgements before the plagiarism report, when the guideline says otherwise. Read the sequence in your guideline and number the physical sheets in pencil on the back before you hand them over.
  2. Unsigned or partly signed certificate. Three copies signed, two not, because the head of department was away. Get every signature on every copy before binding, or bind only the signed copies and do the rest later.
  3. Missing or broken page numbers. The front matter runs i to xii, then Chapter 1 starts at page 13 instead of page 1, or two sections both restart at 1. Fix the section breaks in the document before exporting.
  4. Table of contents that does not match the pages. Usually from a last-minute edit after the TOC was generated.
  5. Wrong cover colour or wrong spelling in gold. A supervisor’s name misspelt on the spine is a complete re-cover.
  6. Fonts not embedded. Symbols become boxes, and the student notices only after binding.
  7. Letter-size pages hiding in an A4 document. One imported appendix at 8.5 x 11 inches gives a visibly different page.
  8. Binding margin on the wrong side. In double-sided printing without mirror margins, every even page loses text into the spine.
  9. Forgetting the CD pocket. The library asks for the disc, and the back board has no pocket. Tell us in advance and we fix one inside the back cover.

How we handle this at Malka Xerox Centre

Thesis work has been part of our daily routine in Kapoorthala since we opened in February 2013, and the process we follow is built to catch the mistakes above before they reach the binding table.

  1. Guideline first. We ask to see your university guideline and go through copy count, colour, spine text and page order with you at the counter or on WhatsApp.
  2. Digital proof. We open your PDF on our system, check page size, fonts, margins and numbering, and send or show you a proof. For students outside Lucknow this is a PDF of the imposed pages plus a mock-up of the spine and cover text.
  3. One copy printed and checked. We print one text block, you (or we, on your instruction) turn every page, and only then do the remaining copies run.
  4. Signed sheets inserted in order. Certificate, declaration and plagiarism pages are collated into each copy in the sequence your guideline lists.
  5. Hard binding in your faculty colour. Rigid board, cloth or rexine wrap, gold foil lettering on spine and front cover, emblem if required, CD pocket if required.
  6. Spiral copies for the guide and examiners at the same time, if you need them.
  7. GST invoice on every order, which many research scholars need for fellowship reimbursement.
  8. Collection or courier. Same-day collection in Lucknow when the inputs are ready in the morning; tracked courier to students in other cities, each copy wrapped separately with corner protection.

Full details and the specifications we offer are on the thesis printing and binding page and the thesis print and bind service page. If you want to compare binding methods before deciding, our thesis binding guide: hard versus spiral walks through both. For everything else we print, from a single paperback to a bulk run, start at all book printing services.

Key takeaways

  • Download your university’s thesis guideline and treat it as the only authority on format, copies, colour and spine text.
  • Common patterns across India: A4, 80 gsm, 1.5 spacing, a wider binding margin, Times New Roman 12, three to five hard-bound copies plus a CD or USB.
  • Use spiral binding for draft copies to the guide and hard binding for final submission copies.
  • Many universities assign cover colours by faculty; confirm the exact colour and material from the guideline or a previous year’s copy, not from memory.
  • Spine lettering in gold usually carries title, name, degree and year; prepare a short title if the full one will not fit.
  • Certificate, declaration and plagiarism pages go on letterhead, signed before binding, in the order the guideline lists.
  • Print colour only on the pages that need it, and number front matter in roman and the main text in arabic numerals.
  • Embed fonts, set A4 in the document, and check the PDF on another device before sending it.
  • Same-day thesis binding is realistic in Lucknow with a morning start; allow about a week for courier to other cities.

If your submission date is close, send us your guideline and your PDF on WhatsApp +91 97927 57892 and we will tell you within the hour what is ready to print and what still needs a signature or a fix. You can also reach us through the contact page. Our counter in Kapoorthala, Lucknow is open seven days a week, 9 AM to 10 PM, and we are used to viva mornings.

Frequently asked questions

What is the standard format for thesis printing in Indian universities?

Most Indian universities ask for A4 pages, 1.5 line spacing, Times New Roman 12 point or similar, a wider margin on the binding side and 80 gsm paper. The exact rules, including single or double-sided printing and copy count, are in your university guideline document, which is the only authority.

How many hard-bound copies of a PhD thesis are usually required?

Three to five hard-bound copies is the common range, split between the central library, the department, the supervisor and the candidate, often with a CD or USB containing the PDF. Some universities now accept fewer printed copies alongside a repository upload. Check your guideline for the exact number.

What colour should a thesis hard binding be?

Many Indian universities assign the cover colour by faculty or degree, with black, maroon and navy blue among the most common. The colour is stated in your university guideline, and a photo of a previous year copy from your department is the safest confirmation. Binding in the wrong colour means re-covering every copy.

What is written on the spine of a thesis?

The spine usually carries the thesis title (a short form if the full title is long), the candidate name, the degree and the year, stamped in gold foil. Some universities add the university name or emblem. Your guideline sets the order, and the text should match the certificate page exactly.

Should the certificate page be signed before or after binding?

Before binding, always. A hard-bound book cannot be opened to insert a signed page without damage. Print the certificate and declaration on institute letterhead, one set per copy plus spares, collect every signature, and hand the signed sheets to the binder with the PDF.

Can a thesis be printed double-sided?

Many universities now accept or encourage double-sided printing to reduce bulk, while some older guidelines still require single-sided pages. If double-sided is allowed, set mirror margins so the wider margin falls on the binding side of every page and start each chapter on a right-hand page.

Do all thesis pages need to be printed in colour?

No. Print in colour only on the pages with figures that need it, such as microscopy images, maps or charts where colour carries meaning, and keep the rest black and white. Give the printer a list of colour page numbers. This keeps the cost down without affecting how the thesis is judged.

How long does thesis binding take in Lucknow?

Spiral copies are usually ready within a few hours. Hard binding for three to five copies can be done the same day at our Kapoorthala counter if you arrive in the morning with the final PDF, signed certificates and the cover colour confirmed. Submission weeks are busy, so allow an extra day where possible.

Can students outside Lucknow get their thesis printed and bound and couriered?

Yes. Students in Delhi, Prayagraj, Varanasi, Patna, Bhopal and other cities send the PDF on WhatsApp or email, approve a digital proof, courier the signed certificate pages to us, and receive hard-bound copies by tracked courier. Most jobs are ready in 1 to 2 working days and courier takes 2 to 5 working days depending on the city.

What is the difference between spiral binding and hard binding for a thesis?

Spiral binding uses a plastic or metal coil, lies flat, and suits draft copies for the guide and examiner copies. Hard binding uses rigid boards wrapped in cloth or rexine with gold lettering on the spine and is the permanent format for final submission copies. Most students need both at different stages.

Need this done at Malka Xerox Centre?

Walk in at Shop No.-10, Yadav Market, Near FI Plaza, Chandganj Kapoorthala, Lucknow, Uttar Pradesh 226022, or message us on WhatsApp to check availability.

Message us on WhatsApp

Sami Jaiswal

Written by the team at Malka Xerox Centre, Kapoorthala, Lucknow.

Chat on WhatsApp
Call WhatsApp Book